Extruders, Downstream And Supply Inc

new and used plastics manufacturing equipment for the extrusion industry

EDS Mdl PT220 Takeoff Machine

- 2.5 Inch X 20 Inch Contact Length

- Both belts are independently and manually adjustable

- 6 Inches of belt opening

- 42 Inch centerline and right to left orientation standard

- 1 HP vector duty AC motor with high torque variable speed drive

- 0-60 Ft/Min standard speed range - specify at time of order if other speed range desired

- heavy duty gearbox @ 25:1 reduction for transition of motor to vertical shaft thru belt drive - note that motor to gearbox is belt driven to allow for customer adjustment of speed range as necessary to suit future applications

- Both belts shaft driven - no backlash as a result

- 1/2 Inch natural gum rubber belts on poly 'V' backing - continious cast with no splice line

- your choice of 115, 230 (single or 3 phase), 460 or 575 volt power thru door disconnect

- Control station with Ft/Min speed indication, start/stop buttons, and 10 turn POT standard

- Nip protection package with guide rolls and front mounted emergency stop button standard

- Machine painted your choice of colors with yellow safety guards

PRICE:   $10,500.00 US  

Optional - Enclosure for the above machine enclosing all rotating and nip areas of the machine.  Access door with 1/4 Inch thick polycarbonate door and interlock safety switch - $1,180.00       

 

 

 

 

EDS Mdl PT428 Takeoff Machine

- 4.5 Inch X 28 Inch Contact Length

- Both belts are independently and manually adjustable

- 6 Inches of belt opening

- 42 Inch centerline and right to left orientation standard

- 2 HP vector duty AC motor with high torque variable speed drive

- 0-60 Ft/Min standard speed range - specify at time of order if other speed range desired

- heavy duty gearbox @ 25:1 reduction for transition of motor to vertical shaft thru belt drive - note that motor to gearbox is belt driven to allow for customer adjustment of speed range as necessary to suit future applications

- Both belts shaft driven - no backlash as a result

- 1/2 Inch natural gum rubber belts on poly 'V' backing - continious cast with no splice line

- your choice of 230, 460 or 575 volt power thru door disconnect

- Control station with Ft/Min speed indication, start/stop buttons, and 10 turn POT standard

- Nip protection package with guide rolls and front mounted emergency stop button standard

- Machine painted your choice of colors with yellow safety guards

PRICE:   $13,950.00 US  

Optional - Enclosure for the above machine enclosing all rotating and nip areas of the machine.  Access door with 1/4 Inch thick polycarbonate door and interlock safety switch - $1,680.00       

 

 Forklift pick-ups and heavy steel swival casters are standard on all machines

 

Guide rollers and nip protectors (not shown) standard on every machine 

 

 Standard control station showing Ft/Min speed indicator, 10 Turn POT, Start and Stop buttons with power service thru door disconnect 

 

 Clean, easy to follow wiring with branch fusing thru-out

 

 Base, air cooled, mounted AC variable speed drive system - belt driven to vertical gearbox which allows for varing speed range use/application over time.  

 

 "Off-the shelf" 90 degree gearboxes transmit 'no backlash' shaft movement to the driven belt rollers  

 

 All carrier rollers are poly 'V' grooved to allow for maximized tracking of the belt and reduced wear on back belting - note that crush of the 'V' because of straight, unmachined rollers is main cause of belt wear   

Below - Takeoff showing Front and back of enclosure option.  

 

 

EDS Mdl PT838 Takeoff Machine

- 8.5 Inch X 38 Inch Contact Length

- Both belts are independently and manually adjustable

- 8 Inches of belt opening

- 42 Inch centerline and right to left orientation standard

Dual 2 HP vector duty AC motors with high torque variable speed slaved drives - one 2 HP mounted on gearbox for direct driving of top and bottom belt.  Drives are linked for exact speed matching and controlled by single 10 turn POT on panel  

- 0-30 Ft/Min standard speed range - specify at time of order if other speed range desired

- Both belts direct driven thru gearboxes - no backlash as a result

- 1/2 Inch natural gum rubber belts on poly 'V' backing - continious cast with no splice line

- 460 volt power thru door disconnect

- Control station with Ft/Min speed indication, start/stop buttons, and 10 turn POT standard

- Nip protection package with guide rolls and front mounted emergency stop button standard

- Machine painted your choice of colors with yellow safety guards

PRICE:   $17,950.00 US  

Optional - Enclosure for the above machine enclosing all rotating and nip areas of the machine.  Access door with 1/4 Inch thick polycarbonate door and interlock safety switch  $1,980.00   

Optional - Pneumatic bottom belt with 'dial in pressure' on profile $1,480.00

Optional - 203/230 or 575 Volt - $485.00

 

 

Drives and optional pneumatics for bottom belt operation located in base of machine.  Note that the unit is show without nip protectors which are standard on every machine. 

Note:  Front Nip Protection Boxes Not Shown But Included

Side of unit shown with dual 2 HP 1200 rpm motors (optional to reach 0-22 ft/min speed range without further gearbox reduction) with dual drives (mounted in base) slaved for exact speed matching.    

 

 

Unit With Guard Package Installed