Extruders, Downstream And Supply Inc

new and used plastics manufacturing equipment for the extrusion industry

EDS Mdl 6.5 Traveling Saw

 A typical traveling saw action involves start of table movement (set to match profile speed), clamping of the profile, saw blade upward motion thru the part (with speed control), blade retraction to rest position, profile release and table return to rest position ready for next cut.  This sequence of operations is activated either by a limit switch (mechanical or infrared) located an appropriate distance downtream or via an encoder and counter with wheel mounted on the takeoff or profile.   

Consisting of:

- 22 inches of table travel with pneumatic assist

- 18 inch diameter carbide tipped blade - capable of cutting 6.5 inch diameter pipe or 1 inch high X 13 inch wide profile or anything in the blade arc between these two dimensions    

- 3 HP AC motor with electromechanical brake

- Adjustable pneumatic clamp, table speed and blade vertical cut rate

- 'Manual Cut' push button

- Limit switch cut activation standard

- Manually adjustable max cut height

- Adjustable entrance and exit guide rolls

- Doors on both ends of machine with 4 inch X 12 inch sight glasses

- Height of 39 1/2 inches to table top surface - machine has 4 (12 inch long) jack screws

- Heavy duty base offers increased stability during rapid or heavy cutting operations

- Safety cover guards mounted on saw input and output sides

- Portable on swival and (if requested) 'V' grooved casters

- Your choice of voltage

- Painted your choice of color

PRICE:   $13,850.00 US  

Optional:  Encoder/Counter Package with 20 FT Cord - $1,095.00  

 

 

  

 

  

 

  

  

 

  

  

 

EDS Mdl 8.5 Traveling Saw

Consisting of:

- 22 inches of table travel with pneumatic assist

- 24 inch diameter carbide tipped blade - capable of cutting 8.5 inch diameter pipe or 1 inch high X 18 inch wide profile or anything in the blade arc between these two dimensions    

- 5 HP AC motor with electromechanical brake

- Adjustable pneumatic clamp, table speed and blade vertical cut rate

- 'Manual Cut' push button

- Limit switch cut activation standard

- Manually adjustable max cut height

- Adjustable entrance and exit guide rolls

- Doors on both ends of machine with 4 inch X 12 inch sight glasses

- Height of 36 3/4 inches to table top surface - machine has 4 (12 inch long) jack screws

- Heavy duty base offers increased stability during rapid or heavy cutting operations

- Safety cover guards mounted on saw input and output sides

- Portable on swival and (if requested) 'V' grooved casters

- Your choice of voltage

- Painted your choice of color

PRICE:   $17,950.00 US  

Optional - Encoder/Counter Package with 20 Ft cord - $1,095.00