Extruders, Downstream And Supply Inc

new and used plastics manufacturing equipment for the extrusion industry

3 1/2 Inch Davis Standard Extruder - Mark 5 Model

- 26:1 L/D Ratio

- 5 Air Cooled Barrel Zones & 3 Die Zones

- Eurotherm Mdl 2208e Temperature Control Instruments

- 60 HP AC Drive Package With Allen Bradley Drive And Marathon Motor

- Running RPVC And Has Spare Screw For PE/PP/Styrene  

- Frame Surrounding Panel Can Be Removed (Was Being Used To Support 600-460 Volt Transformer)

- Machine Will Be Steam Cleaned Repainted Your Choice Of Colors

PRICE:  $39,500.00 US

 

 

 

 

 

Krauss Maffei Twin Screw

- Mdl KMD50 K - 50 MM Screws

- 30 HP DC Drive Package

- Machine Was Processing Powder RPVC For Window Profiles

- PRICE:  $10,000.00 US

 

 

 

4 1/2 Inch Deltaplast Extruder

- 34:1 L/D Ratio

- 7 Barrel Zones - Liquid Cooled

- 3 Die Zones

- 55 Inch Centerline - Can Be Reduced

- 250 HP Reliance DC Drive Package

- 18:1 Reduction (Machine Sheaved For 100 Screw RPM) Hansen Gearbox

PRICE:  $39,500.00 US

 

 

 

Royal Amut Profile Air Cooling Table

- 15 Ft Long

- Independent From And Rear Height Adjustment

- 14 Dual Cooling Fans With Power Outlets For As Many As 18 More

PRICE:  $1,000.00 US 

 

 

CDS Takeoff

- Mdl CCH40-8M - 8 Inch X 40 Inch Contact Cleated Belt

- 3 HP AC Drive Package

- 0-10 Ft/Min Speed Range

- Pneumatic Top Belt Adjustment, Manual Bottom Belt Adjustment

- Remote Drive Control Station On 50 Ft Umbilical

PRICE:  $11,500.00 US

 

 

 

RDN Saws

- 2 Units Available 

- Down Acting And Traveling Head

- 12 Inch Diameter Blade

PRICE:  $3,500.00 Each

 

 

 

Complete Profile Downstream Packages

- Two Packages Available With Essentially The Same Specifications But Of Different Brand Names

- Calibration Tables Are 20 Ft Long With Rails On 12 1/2 Inch Centers, Have 3 1/2 Inches Of Lateral Adjustment, Have Height Adjustment From 35 Thru 42 1/2 Inches To Top Of Rails, Have (2) 7.5 HP Vacuum Pump Packages And Have 5 HP Recirculation Packages

- Takeoff/Saw Combination Units Have 9 Inch Wide Cleats X 88 Inch Contact, Have Dual 3 KW (5 HP) Motors (One For Each Belt) And Slaved For Speed Matching - Saws Have Traveling Tables, Electronic Length Control And 18 Inch Diameter Blades

In both cases, all electrical motors, wiring and electrical/pneumatics have been replaced with new UL standard and source voltage of 460/3/60.

 

Xinda-Fehimex Package     

 

 

PRICE:  $24,500.00 US For Set

Qingdao Machinery Package 

Note:  The Takeoff On This Line Is Slightly Larger At 11 1/2 Inch X 96 Inch Contact

 

 

 

 

 PRICE:    $29,500.00 US For Set

 

CDS 12 Inch Pipe Puller

- Mdl CPH 460-12, S/N 160900

- 4 Belts X 48 Inch Contact

- 2 - 53 Ft/Min Speed Range

- (4) Individual Servo Motors - One On Each Belt And Slaved For Exact Speed Matching

- 460 Volt Power

PRICE:  $17,500.00 US

 

 

  

Ball & Jewel Grinder

- 16 X 20 Inch Throat Size

- Fully Soundproofed

- Standard Tray Feed With Tangential Infeed To 3 Blade Open Rotor (Parts Fall Into Downstroke Of Rotor

- 5/16 Inch Screen Size

- 25 HP Motor With Flywheel

- Portable On Casters And With Airveyor Discharge Style Base (4 Inch Pipe Connection)

PRICE:  $4,500.00 US 

 

 

 

  

Gaylord Tipper With Day Bin And Auger Feeder

- Good Working Condition

- New Variable Speed Drive Control For 6 Inch Spring Style Auger

Price:  $6,500.00 US

 

3.5 Inch Xaloy Slide Plate Screen Changer

- Right To Left Orientation

Price:  $2,500.00 US 

2.5 Inch Xaloy Slide Plate Screen Changer

- Right To Left Orientation

- Came Right Out Of Production

Price:  $2,000.00 US

 

 

Hamilton-Avtec Powder Hopper Loaders

- Loads Up To 600 Lbs/HR Powder - Automatic Filter Cleaning After Each Load Cycle

- 115 Volt With 10 Amp Draw

- 3 Pcs Available

PRICE:  $1,000.00 US Each